Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p3 #1: Thu Apr  8 05:48:05 MDT 2004
    root@peach:/usr/obj/usr/src/sys/PEACH
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0764000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc076421c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (564.95-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 166658048 (158 MB)
avail memory = 156291072 (149 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fdf50
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 11
pcib0: slot 31 INTD is routed to irq 9
pcib0: slot 31 INTB is routed to irq 11
agp0: <Intel 82810 (i810 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 11 at device 1.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
xl0: <3Com 3c900B-COMBO Etherlink XL> port 0x3000-0x307f mem 0xf4100000-0xf410007f at device 11.0 on pci1
pcib1: slot 11 INTA is routed to irq 10
xl0: Ethernet address: 00:50:04:72:1a:aa
xl0: selecting 10baseT transceiver, half duplex
lnc0: <PCNet/PCI Ethernet adapter> port 0x3080-0x309f mem 0xf4100400-0xf410041f at device 14.0 on pci1
lnc0: Attaching PCNet/PCI Ethernet adapter
pcib1: slot 14 INTA is routed to irq 11
lnc0: PCnet-PCI address 00:20:35:b1:70:1c
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 31.2 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
orm0: <Option ROMs> at iomem 0xe1000-0xe3fff,0xe0000-0xe0fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 564952611 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
GEOM: create disk ad2 dp=0xcb1b4960
ad2: 7665MB <QUANTUM Bigfoot TX8.0AT> [15574/16/63] at ata1-master UDMA33
acd0: DVDROM <HITACHI GD-2000> at ata1-slave PIO4
Mounting root from ufs:/dev/ad2s1a